Â̾ÞÈËÊÓƵ

To use vLab, you'll need to make sure you have the correct program installed on your computer:

• Systems running Windows 10/11 and macOS:
  • ²Ñ¾±³¦°ù´Ç²õ´Ç´Ú³ÙÌýRemote Desktop Connection
    • Windows 10/11: This software is included with all Windows computers.
    • macOS: The software can be download from the Mac App Store by clickingÌý.Ìý If you are using a Mac on the Â̾ÞÈËÊÓƵ campus, this software will already be installed.
• Systems running GNU/Linux:
  • Remmina
    • Information can be foundÌý.

Once you are sure to have one of the programs listed above installed on your computer,Ìýclick here to download theÌývLab.rdpÌý´Ú¾±±ô±ðÌýthat will allow you to connect to the vLab.Ìý If you are on a PC or Mac, move the file to an easy-to-access location, such as your Desktop.

• If you are using a Windows PC or a Mac:
  1. Double-click theÌý±¹³¢²¹²ú.°ù»å±èÌýfile that you previously downloaded.
  2. When you are asked for your credentials:
     1. For your username, enter yourÌýÂ̾ÞÈËÊÓƵ NetIDÌýpreceded byÌý´¡±«±Ê°ÀÌýin the formatÌý´¡±«±Ê°À±·±ð³Ù±õ¶Ù.ÌýÌýFor example, if your NetID wereÌýa123456, you would enter the usernameÌý´¡±«±Ê°À²¹123456
        • It is critical that you enter the backslash "\", not the forward-flash "/".
     2. For your password, enter your current Â̾ÞÈËÊÓƵ password, then press the Enter key to connect.
  3. That's it!Ìý You should be connected to the vLab system.
  4. Next time you want to connect to the vLab, just repeat these steps by double-clicking on the vLab.rdp file.

Ìý

• If you are using a GNU/Linux machine:
  1. In the main window of the Remmina application, open theÌýFileÌýmenu (it may show up as three horizontal lines, instead of the word "file"),ÌýselectÌýImport, and double-click on the vLab.rdp file that you downloaded.
  2. Right-click on the newly-created vlab.aup.edu entry, and chooseÌýEdit.
  3. In the Advanced tab:
     1. ChangeÌýGateway Transport TypeÌýtoÌýRPC.
     2. At the bottom of the page, check the boxÌýUse base credentials for gateway too.
     3. Click onÌýSave.
  4. To connect, double-click on the profile nameÌývlab.aup.edu.
     1. In the Username field, enter your Â̾ÞÈËÊÓƵ NetID only.Ìý For example, if your NetID isÌýa123456, enter exactlyÌýa123456
     2. In the Password field, enter your current Â̾ÞÈËÊÓƵ password.
     3. In the Domain field, enterÌýÂ̾ÞÈËÊÓƵ
     4. ÌýClickÌýOK.Ìý You'll be connected to the vLab system!
  5. The next time you want to connect to the vLab, just double-click theÌývlab.aup.eduÌýprofile, enter your credentials, and clickÌýOK.

The first time you connect to vLab, a window will open asking you to enter your Â̾ÞÈËÊÓƵ e-mail address.Ìý This allows you to connect the vLab to your Â̾ÞÈËÊÓƵÌýOneDriveÌýstorage.

1. Please enter your Â̾ÞÈËÊÓƵ e-mail address, such asÌýa123456aup.eduÌýthen clickÌýNext.
2. Enter your Â̾ÞÈËÊÓƵ password, then clickÌýSign In.
3. If you see any checkboxes labelledÌýDon't ask again forÌýXXÌýdays, make sure to check the checkbox.
4. When asked toÌýStay signed in?, chooseÌýYes.

Once you have completed the steps listed above ("Connecting to vLab for the first time"), you should be able to access your Â̾ÞÈËÊÓƵ OneDrive online storage by double-clicking theÌýOneDrive StorageÌýicon on the vLab's desktop.Ìý Please make sure to save all files in the OneDrive storage.Ìý You can access files that you save in the OneDrive storage on other computers using a web browser byÌý.

The vLab allows you to print be selecting the printer calledÌýÂ̾ÞÈËÊÓƵrint.Ìý After printing, you can use your Â̾ÞÈËÊÓƵ ID card to access your files at any of the large printers/copiers on campus.

When you cut or copy a file in the vLab, you should be able to Paste it on your personal computer in a different window, and vice versa.Ìý For example, if you have text that has been produced in the vLab, and you want to use it in a program on your own computer, you can select the text,ÌýCopyÌýit by pressing the keysÌýCtrl-CÌýorÌýCmd-C,ÌýthenÌýPasteÌýit into a text editor in your computer on your computer such as Microsoft Word or Pages.

If you disconnect from the vLab for more than 15 minutes, or are inactive for an extended period, you will be signed out from the vLab.Ìý To avoid losing data, make sure to always save your work in progress.

When you are done using the vLab, please make sure to properly sign out by clicking on the Windows menu icon, clicking the little icon that looks like a person, then choosingÌýSign out.

If you're on-campus and having trouble using the vLab, the fastest way to get help is to come to the IT Services office, located in room Q-A201, between 9 AM and 6ÌýPM.

Otherwise, please call us atÌý+33 1 40 62 06 96Ìýbetween 9 AM and 6 PM, or send us an e-mail atÌý, making sure to include information such as your computer type (Windows or Mac), your NetID, and the problem you're experiencing.